Unimark EC3000 Series Návod k obsluze Strana 5

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 24
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 4
Page 5 of 24 71U-1409-300K; REV 20 EC3000 Installation and Operator’s Manual
3.4 Rear Shroud Mounting Option
The Unit has a rear shroud mounting option to secure the unit to the counter or desk surface and to cover and protect the
cable and connectors. The option interlinks into the bottom of the Unit and latches onto the rear of the Unit. It is
removed using a key lock.
Removing the Unit from the Mount
1. Insert the key into the lock and turn
2. Pull the Unit forward from the Mount
3. Verify the Unit is clear of the Mount
4. Remove the cables from the rear of the unit
Installing the Unit onto the Mount
1. Make sure all required cables are connected
2. Align the Unit with the Interlinks of the Mount
3. Slide Unit back until it latches into the Shroud
The Mount has four 0.200” (5mm) holes, which are used to secure it to an adaptor or counter using the appropriate
machine or wood screws. Depending on the counter or adaptor use standard 6-32 or 8-32 (3mm or 4mm) machine or #6
or #8 self-tapping screws. Screw head height must not exceed .180” (4.5mm) in height.
Key Lock
Shroud
Align tabs with slots
Interlinks
Interlinks
Mountin
g Screws
Zobrazit stránku 4
1 2 3 4 5 6 7 8 9 10 ... 23 24

Komentáře k této Příručce

Žádné komentáře